Welcome to the official website of Zhengzhou Shanchuan Heavy Industry Co., LTD.! For details please call:0371-67855088 67855188

CHEN

Shaking table

Production situation :

Processing power :Mountains and rivers card type - 6 S shaking table is a physical separation equipment, it is mainly used for separating gold, silver, lead and zinc, tantalum, niobium, tin and other rare metals and precious metal ore.Belong to re-election equipment select

Range of application :6-S shaker is the sorting of fine ore mineral processing equipment commonly used in the treatment of metal ore when the effective selection of particle size range is 3 ~ O. 019 mm, the upper limit of coal particle size up to 10 mm. The outstanding advanta

Product introduction :The application of the shaker has been nearly a hundred years of history, the initial shaker is the use of impact caused by bed asymmetric reciprocating motion, made in 1890 for coal preparation. The 6-S shaker (beneficiation shaker) was made from A. Wilf

The national sales hotline 24 hours a day :

0371-67855088 67855188

Product advantage

  Mountains brand with domestic shaking table bed and gravity separation technology, has high enrichment ratio, good separating efficiency and the advantages of simple operation, and a final concentrate and tailings in the end.Compared with the traditional process has no agents, and the advantages of low energy consumption, easy management, high performance/cost ratio.

Product introduction

  Shaking table beneficiation process is conducted in a copy of the tilt table, ore grain group from the Angle of mesa feeder trough into, by lateral flushing water supply for the sink at the same time, under the influence of vibration wave, according to the proportion and granularity theory, and vertical movement and lateral movement. YanTai proportion and granularity of different ore grain along the movement direction of the respective trapezoidal shed, respectively from the concentrate and tailings discharge side of different position, the final is divided into concentrate, middlings and tailings.

Technical parameters

The name According to

single a

Coarse sand table

Fine sand table

slimer

Mesa dimension

The length of the

MM

4450

4450

4450

Drive side wide

MM

1855

1855

1855

Concentrate the wide

MM

1546

1546

1546

To the biggestOre granularity

MM

2

0.5

0.15

For ore

T/d

30 to 60

10-20

15 to 25

Feed concentration

%

25 to 30

20-25

15 to 25

trip

MM

16-22

11-16

8-16

frequency

F

15-48

48-53

50-57

Mesa clean water

T/d

80-80.

30 to 60

10 to 17

Transverse slope

The degree of

2.5 to 4.5

1.5 to 3.5

1 to 2

Longitudinal slope

%

1.4

0.92

--

Mesa pinchout Angle

The degree of

32-42

40

42

Processing area

--

7.6

7.6

7.6

Table length than

--

2.6

2.6

2.6

The motor power

KW

1.1

1.1

1.1


Online message

  • *Products:
  • *Name:
  • Tel:
  • *E-mail:
  • Add:
  • Remarks: