Welcome to the official website of Zhengzhou Shanchuan Heavy Industry Co., LTD.! For details please call:0371-67855088 67855188

CHEN

jig

Production situation :5-200T/H

Processing power :Tungsten, tin, gold, iron, manganese, titanium, froe, chromium, sulfur and other mineral beneficiation and manganese slag, chromium slag, steel slag smelting slag recycled alloy particles, such as mine tailing in the metal recycling, tailings disposal, et

Range of application :1, the use of multi-chamber common control valve technology. 2, the use of tapered slide valve, reliable, low failure rate of 70%, low energy consumption, to meet the needs of different media sorting, improve processing capacity of more than 20%. 3, the s

Product introduction :Sawtooth wave jig is acting under a single double room jig, it USES water as a separation medium, according to the proportion of useful minerals and gangue separation (density) is poor.Sawtooth wave jig for its curve assumes the sawtooth waveform in the p

The national sales hotline 24 hours a day :

0371-67855088 67855188

Product advantage

  Moving sieve jig

  A moving sieve jig, introduction

  Jig is appeared earlier gravity separation equipment, jig work based on the principle of the gravity separation, the use of mineral and the proportion of gangue poor sorting, weight of different mineral raw materials in the vertical alternation of the settling velocity of the flow, the proportion of large mineral sedimentation rate faster, jig sorting the bottom of the tank, the proportion of small mineral sedimentation speed slower, occupy the separation tank, the upper part of through the special weir plate according to the different mineral discharge respectively, realized according to the proportion of the separation effect.

  Artificial barrels of washing, from the initial to the piston jig, moving sieve jig, the diaphragm jig, jig development went through several different stages, now the basic were replaced by a diaphragm jig, but water consumption is the chief drawback of diaphragm jig, selected granularity co., LTD., in order to play to the advantages of jigging pause ore, solve the problem of water shortage area jigging separation, gongyi hengtai machinery factory of the latest developed new mining moving sieve jig, the machine has high efficiency, energy saving, environmental protection and so on processing advantages, at the same time selected granularity, selected grain width, mineral processing capacity is big, the water consumption is only one over ten of the common diaphragm jig, is currently the jig dressing device of the water, the successful development of moving sieve jig will be from the biggest extent solve the jigging ore difficult problem of water shortage area, to make our factory jig applications more widely.

  Second, the characteristics of moving sieve jig

  1, cover an area of an area small, large capacity per unit area, concentrate and tailings through own conveying mechanism respectively.

  2, less water consumption, moving sieve jig by forced vibration sieve material layer, there is no need to water pressure, only added loss of water, water consumption is only one over ten of the common diaphragm jig.

  3, stroke, speed is easy to adjust, adopts advanced frequency control technology, easy operation and management.

  4, all moving parts adopt automatic hydraulic oil lubrication, ensure the service life and the work reliability of the moving parts.

Product introduction

  Product introduction

  Beside the LTP acting jig

  Beside a, LTP34/2 lift jig's brief introduction:

  LTP34/2 jig is a small double room beside acting jig.This machine USES water as medium of gravity separation, according to the useful minerals and gangue separation, worse than weight (density) of material in water flow into the jig is encouraging layered gradually, under the action of light mineral separation groove of the upper, heavy mineral separation groove of the lower, through the special discharge closed discharge device.Next to the lift jigging machine has small size, simple operation, small investment and fast income of.Widely used in tungsten, tin, gold, iron, lead, zinc, manganese and other heavy metal of small jig dressing.

  Second, LTP34/2 side lift jig features:

  1, this machine is small, convenient mobile operation, suitable for small river mineral processing operations.

  2, simple structure, easy operation and maintenance.

  3, small investment, fast returns, is the ideal choice for small gravity concentration equipment

  .4, strong applicability for various kinds of mineral dressing, reliable in performance.


  LTA1010/2 jig is acting under single double room jig, also known as the jig is acting under the cone diaphragm.This machine is using water as medium, according to the mineral and the proportion of gangue separation (density) is poor, the dressing principle based on the theory of gravity separation.LTA1010/2 normal work of the jig jigging cycle curve shows sine waveform, has the characteristics of the rising water evenly, this series of jigging machine has large quantity, high recovery rate, continuous work and so on processing advantages.Lord to be used for processing of tungsten, tin, antimony, alluvial gold, manganese ore, lead-zinc mine, lapis lazuli, barite, fluorite ore, pyrite, limonite, hematite, etc all kinds of metal and non-metallic minerals, for silicon manganese slag, ferrochrome slag, nickel and other metal smelting iron slag slag processing and recycling also has the very good effect, in recent years in the field of metal smelting slag recycling and utilization has been widely used.

  LTA series jig and LTA55/2 experimental jig, LTA1515/2 jig, jig LTA2020/2 three, the three kinds of the transmission structure of the jig and regulating device are exactly the same as that of LTA1010/2 jig.

  2, 2 jig LTA1010 / features:

  1, compact structure, cover an area of an area small, large capacity per unit area.

  2, eccentric connecting rod mechanism transmission, sine wave jigging cycle curve, jigging strong water, into the material particle size is big, processing capacity.

  3, simple structure, convenient maintenance, safe and reliable operation.

  4, stroke, speed adjustment is convenient, simple operation, the normal work operation cost is low.



Technical parameters

model

Cross section type

The number of columns

Jigging room number

Coefficient of stroke

Stroke (mm

At times(time/min)

Capacity (T/h

Power (KW

LTP34/2

_

_

2

0.58

0-27

280-280.

2-6

1.1


Screen area (㎡)

Feed particle size(mm)

Processing capacity (T/h

Stroke (mm

Rush time (time/min

Bucket power (KW

Moving sieve power(KW)

Overall dimensions(MM)

Weight (T

2.9

30-50

20-25

10-80.

0-180.

4

7.5

5125 * 3795 * 3554

10.3


model

Cross section form

The number of columns

Jigging room number

Jigging area (

Coefficient of stroke

Stroke (mm

At times

Capacity (T/h

Power (KW

2LTC-366/8T

trapezoidal

double

8

2.16

0.68 to 0.41

0 to 50

120-120.

3-6

1.1 * 2

2LTC/6109/8T

trapezoidal

double

8

5.76

0.52 to 0.35

0 to 50

120-120.

20-30

1.5 * 4


model

Coefficient of stroke

Stroke (mm

Rush time (time/min

Feed particle size (mm

Capacity (T/h

Water consumption (T/h

power(KW)

LTA55/2

0.5

0 to 25

250-250.

8

From 1 to 5

4-20

1.5

LTA1010/2

0.5

0 to 25

250-250.

8

5-15

20-60

3

LTA1515/2

0.5

0 to 50

200-200.

10

15 to 25

100-100.

5.5

LTA2020/2

0.5

0 to 50

200-200.

10

30-50

160-160.

   Jig AM - 30 large particles

  One, AM - 30 jig's brief introduction:

  AM - 30 jig was biggest particle size can be up to 30 mm, with top and bottom discharge at the same time, the concentration characteristics of continuous work, is currently the most widely used and successful jig a large particles.The machine designed by our research and development and design units themselves, the original design is mainly used for processing of hematite has developed to hematite, limonite, iron ore, manganese ore, barite, fluorite, lapis lazuli, mercury, antimony and other mineral beneficiation, separation effect is good, get unanimous approval and favorable comment of numerous customers.

  AM - 30 jig by maanshan mining institute, mainly used for sorting, gu shan iron ore after our improvement and innovation, its processing and the applicable scope has larger ascension, this machine is one of the big grain processing equipment, at present is mainly used for processing hematite, limonite, iron ore, antimony, mercury, barite ore, the azure stone, fluorite ore and other minerals, is also used to dealing with chromium slag, silicon manganese slag etc. Various ferroalloy slag recycling.With large quantity, good separation effect, not hierarchical processing advantages such as.

  Second, the advantage of AM - 30 jig:

  1, energy saving, high efficiency, environmental protection.

  2, wide in size range, 0 to 30 mm graded mineral is not graded.

  3, and discharge at the same time, the concentrate grade discharge.

  4, continuous work stable performance, high wear-resisting technology, the equipment service life is long.

  Three, AM - 30 jig technical parameters:

model

Cross section form

The number of columns

Jigging room number

Jigging area (

Coefficient of stroke

Stroke (mm

At times

processing(T/h)

Power (KW

AM-30

rectangular

Double row

4

2.574

0.47

0 to 50

130-130.

10-15

3

  2 LTC - 912-4 a jig

  A, 2 LTC - 912/4 a jig's brief introduction:

  2 LTC - 912/4 a jig, also known as the big size jig, the selected size up to 50 mm, is one of the largest mining at present domestic selected granularity diaphragm jig, this jig developed changed the past large mineral cannot directly preselected, coarse ore can directly enter the pause, save the broken power, effectively improve the efficiency of coarse grained disseminated mineral dressing.Large-grained jigging machine is mainly used for large pieces of hematite, limonite, iron ore, manganese ore, barite ore, the azure stone, fluorite ore and crystal grain size of coarse mineral beneficiation, has a large quantity, such as large granularity separation advantage.

  The large-grained jig is made up of gongyi Frey machinery factory independent research and development and one of the products to the market, is my factory according to customer needs, manganese ore, in view of the partial coarse grained disseminated hematite, limonite, iron ore, fluorite ore, mechanization of heavy minerals such as crystal stone washing and jig design and manufacture of mine big particle size, the success of the equipment was broken before the history of the large pieces of ore can only choose to reduce the hand picking work pressure, improve the separation efficiency and effectiveness, is a new type of large ore gravity concentration equipment.

  2, 2 LTC - 912/4 a jig advantage:

  1, energy saving, high efficiency, environmental protection.

  2, equipment cover an area of an area small, large quantity.

  3, selected grain width, selected granularity, maximum particle size can be up to 50 mm.

  4, 30-50 mm graded mineral don't grading was selected, choose don't effect is good.

  3, 2 LTC - 912/4 a jig technical parameters:

model

Cross section type

The number of columns

Jigging room number

Jigging area

Coefficient of stroke

Stroke (mm

At times(time/min)

Capacity (T/h

Power (KW

2LTC-912/4

Major form

double

4

4.32

0.49

0 to 50

160-160.

10 to 30

11

2LTC-912/4A

rectangular

double

4

4.32

0.49

0-100.

120-120.

20-40

11





Online message

  • *Products:
  • *Name:
  • Tel:
  • *E-mail:
  • Add:
  • Remarks: