Welcome to the official website of Zhengzhou Shanchuan Heavy Industry Co., LTD.! For details please call:0371-67855088 67855188

CHEN

Cone crusher

Production situation :10-400t/h

Processing power :Broken cavity type is determined by the ore use, standard applicable to the broken;In middle type is suitable for the finely;The short head model is suitable for fine grinding.According to the different way of adjust the discharging mouth and overload saf

Range of application :Motor, transmission shaft, spring, frame, liner, crushing cone

Product introduction :Mountains and rivers series crusher, cone crusher, suitable for all kinds of hardness of the ore in broken and finely.With reliable structure, high efficiency, easy to adjust, economic use, etc

The national sales hotline 24 hours a day :

0371-67855088 67855188

Product advantage

  Moving cone pressed on the spindle 15, the spindle end in a conical eccentric shaft sleeve hole, as the eccentric shaft sleeve rolled by moving cone rotary pendulum motion.In order to meet the requirements of moving cone as a cycle of movement, moving made spherical surface to the bottom of the cone, and bearing on the spherical bearing, moving cone and the whole quality of the main shaft is supported by the spherical bearing and frame.The machine safety device is installed in a frame around the spring, when the big iron when the materials into the crushing cavity broken, bearing ring on the spring and the adjusting ring was forced to lift up and compression spring, thus increasing the moving cone and the distance between the fixed cone, increasing the discharge port, discharge the gouge, avoid damage to the parts.Then in the spring under the action of stretch, supporting ring and adjusting ring back quickly in situ, were broken.

Product introduction

   finely cone crusher in crushing cavity in the form is divided into: standard (crusher), intermediate type, finely in () and the short head type finely with three.Of which the most widely used standard and short head type.Their main difference is that the section shape of crushing cavity and parallel with the length of the different, the standard of moving cone slope steep, parallel with short;Short head type dynamic cone tilting slower, parallel with the longer, the middle type between the two,

Technical parameters

model

Broken cone diameter

The largest feed size

Discharging mouth width

Processing power

The motor power(kw)

Number of spindle swing

The weight of theWeightt

Overall dimensions(Long * wide * high)

Type

PYB

600

600

65

12-25

40

30

356

5

2234x1370x1675

PYD

35

3-13

12-23

5.5

2234x1370x1675

PYB

900

900

115

15 to 50

50-90.

55

333

11.2

2692x1640x2350

PYZ

60

5-20

20-65.

11.2

2692x1640x2350

PYD

50

3-13

15 to 50

11.3

2692x1640x2350

PYB

1200

1200

145

20 to 50

110-110.

110

300

24.7

2790x1878x2844

PYZ

100

8-25

42-135.

25

2790x1878x2844

PYD

50

3-15

18-105.

25.3

2790x1878x2844

PYB

1750

1750

215

25 to 50

280-280.

160

245

50.3

3910x2894x3809

PYZ

185

10 to 30

115-115.

50.3

3910x2894x3809

PYD

85

5-13

75-75.

50.2

3910x2894x3809

PYB

2200

2200

300

30 to 60

59-1000.

280-280.

220

80

4622x3302x4470

PYZ

230

10 to 30

200-200.

80

4622x3302x4470

PYD

100

5-15

120-120.

81.4

4622x3302x4470

Online message

  • *Products:
  • *Name:
  • Tel:
  • *E-mail:
  • Add:
  • Remarks: